Glass Heat Exchangers

General Description:-

Heat must be transferred between two fluids in many different processes in the chemical, nuclear and pharmaceutical industries. Therefore heat exchangers are the crucial components in many chemical process plants.

Glass Shell & Tube Heat Exchangers

The requirement for larger exchange areas in conjunction with a compact construction has been met by development of shell and tube heat exchangers. Whether installed as a single unit or a part of complete installation shell and tube heat exchangers offer significant advantages:-

  • Corrosion resistance.
  • Outstanding heat transfer.
  • Extremely low pressure drop.
  • Space-saving arrangement by installing in the horizontal or vertical position.
  • Simple replacement of the inner tubes for repair and cleaning owing to a construction designed to permit easy servicing.

The standard range includes shell and tube heat exchangers in various sizes with exchange areas ranging from 2.5 to 25 m2. The shell diameters are DN150, 200 and 300. The standard design has a glass shell, glass tubes, PTFE end plates and baffles and either glass or stainless steel end covers. The tube bank is made up of single tubes sealed individually into two tube plates.

Damaged tubes can be either blanked off or replaced on site. The operating ranges (pressure and temperature) for the various types are as follows :-

Operating Ranges

Maximum operating temperature (Shell side and tube side) : 150 deg C.

Maximum temperature difference between the shell side and tube side process fluids: 130 K.

Maximum operating gauge pressure and maximum pressure difference

DN Exchange Area Maximum Allowable Pressure (bar gauge)
(m2) Shell (all types) Tube Side Metal Glass
150 2.5-5 2 3 2
200 5-10 1 3 1
300 To 16
20
25
1 3
2.8
2.6
1

The particular advantage of the shell and tube heat exchanger lies in the high heat transfer coefficients. The following values can be used for approximate sizing :

Liquid-Liquid exchange : k = 250 – 400 W/m2 K

Condensation : k = 500 – 700 W/m2 K

Corrosion damage and maintenance work on heat exchangers can give rise to high running costs when plants are handling corrosive chemicals. These costs can be considerably reduced by the use of shell and tube heat exchangers.